Icon Vehicle Dynamics 48700X 2.5 VS Remote Reservoir CDXS Front Coilover Reservoir Adjustable Shock Lift 1.5-4" Ford Bronco 21-26 Pair

ICON Vehicle Dynamics V.S. 2.5 Series

Remote reservoir front coilover shocks with CDXS designed for the 2021–2026 Ford Bronco. These adjustable coilovers provide significant lift and improved suspension performance for both on- and off-road use. Vehicle-specific shock length and valving, a larger 2.5" shock body, and increased piston area maximize travel while maintaining superior ride quality. Remote reservoirs increase oil volume and heat dissipation to resist overheating and cavitation under hard use. ICON's Compression Damping Dual Speed (CDXS) valves allow independent high-speed and low-speed compression adjustment with 10 detented settings for precise tuning of handling response and overall aggressiveness.

• Lift adjustment: Up to 3–4" of front lift on non-Sasquatch Broncos or 2–3" over stock on Sasquatch-equipped Broncos
• Increased wheel travel: Up to 11.5" for improved off-road capability
• Vehicle-specific tuning: Shock length and valving tailored for superior damping and control
• Remote reservoirs: Maintain cooler operating temperatures during extended off-road use
• ICON CDXS: Independent high-speed and low-speed compression adjustment for fine tuning
• Durable construction: 6061 aircraft-grade aluminum CNC machined components and corrosion-resistant CAD-plated shock bodies with 7/8" diameter shafts
• Suspension components: ICON engineered coil springs, FK rod end bearings for longevity and minimal deflection, and high-strength alloy CNC machined lower bar pin
• Serviceable: Fully rebuildable and re-tunable
• Installation: 100% bolt-on — no drilling, cutting, or welding required
• Balanced performance: When paired with ICON 2.5 Series rear coilovers, front-to-rear vehicle control is optimized

Notes

• OEM wheels & tires fitment with Sasquatch package: Yes; without Sasquatch package: No
• Recommended aftermarket wheels with Sasquatch package: 17x8.5" with 4.75" backspace (0mm offset); 18x9" with 5.00" backspace (0mm offset); 20x9" with 5.00" backspace (0mm offset)
• Recommended aftermarket wheels without Sasquatch package: 17x8.5" with 5.75" backspace (25mm offset); 18x9" with 6.00" backspace (25mm offset)
• Recommended aftermarket tires with Sasquatch package: 35" x 12.50" (37" tires require coilover bump stop spacers and minor trimming)
• Recommended aftermarket tires without Sasquatch package: 35" x 12.50" (37" tires require coilover bump stop spacers along with trimming and modifications; high-clearance crash bars are recommended)
• Will not fit Bronco Raptor
• Factory upper control arms may not align properly past 2.5" of lift; above 2.5" an aftermarket upper control arm is recommended
• Shocks are fully serviceable; coilover heights indicated are for a stock-equipped vehicle
• When running 37" tires, use up-travel limiters part #611075 in the front
• Recommended crash bars part #42000 on non-Sasquatch equipped vehicles when running 35" tires
• When running 37" tires, crash bar removal may be required but is not recommended
• Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install
• Due to increased wheel travel and lift height, ICON upper control arms with Delta Joint Pro (part numbers 48400DJ or 48500DJ) are recommended; other aftermarket front upper control arms may not be compatible. Verify fitment and cycle the suspension to check for ball joint bind to avoid component failure or injury.
• Fitment testing performed with ICON and OEM steering components; certain aftermarket steering components may not be compatible due to tight clearances
• Bronco Everglades lift height range will be approximately 1.5–2.5" over stock

Icon Vehicle Dynamics 48700X 2.5 VS Remote Reservoir CDXS Front Coilover Reservoir Adjustable Shock Lift 1.5-4" Ford Bronco 21-26 Pair - Features