Icon Vehicle Dynamics 48700E 2.5 VS Remote Reservoir CDEV Front Coilover Reservoir Adjustable Shock Lift 1.5-4" Ford Bronco 21-26 Pair

ICON V.S. 2.5 Series

Adjustable remote-reservoir front coilovers with CDEV designed for the 2021–2026 Ford Bronco. These shocks deliver increased travel and refined damping for on- and off-road performance while allowing significant front lift for larger wheel and tire combinations.

• Increased wheel travel — up to 11.5" for improved off-road articulation and ride quality
• Vehicle-specific tuning — shock length and valving optimized for Bronco chassis dynamics
• 2.5" shock body with remote reservoirs — greater oil volume and heat dissipation to resist overheating and cavitation
• Compression Damping Electronic Valves (CDEV) — lightning-fast electronic compression tuning and active adjustment
• ICON Intelligent Control (IIC) — onboard sensors monitor vehicle movement and make near-instant compression changes; configurable via wireless app
• Adjustable lift — up to 3–4" on non-Sasquatch Broncos or 2–3" on Sasquatch-equipped Broncos
• ICON-engineered coil springs for matched spring rates and performance
• Premium construction — 6061 aircraft-grade aluminum CNC components, corrosion-resistant CAD-plated shock bodies, and 7/8" diameter shafts
• Durable hardware — FK rod end bearings, high-strength alloy CNC machined lower bar pin
• Fully rebuildable and re-tunable for long-term serviceability
• 100% bolt-on installation — no drilling, cutting, or welding required
• Requires matching rear coilovers with CDEV and IIC module for balanced front-to-rear control and optimal vehicle dynamics

Technical highlights

• OEM wheels & tires fitment (With Sasquatch Package): Yes
• OEM wheels & tires fitment (Without Sasquatch Package): No
• Recommended aftermarket wheels (With Sasquatch Package): 17x8.5" w/ 4.75" backspace / 0mm offset; 18x9" w/ 5.00" backspace / 0mm offset; 20x9" w/ 5.00" backspace / 0mm offset
• Recommended aftermarket wheels (Without Sasquatch Package): 17x8.5" w/ 5.75" backspace / 25mm offset; 18x9" w/ 6.00" backspace / 25mm offset
• Recommended tires (With Sasquatch Package): 35" x 12.50" (37" tires require coilover bump stop spacers and minor trimming)
• Recommended tires (Without Sasquatch Package): 35" x 12.50" (high clearance crash bars recommended; 37" tires require coilover bump stop spacers along with trimming and modifications)

Notes

• Will not fit Bronco Raptor
• Factory upper control arms (UCAs) will not align properly past 2.5" of lift; above 2.5" an aftermarket UCA is recommended
• Shocks are fully serviceable; coilover heights indicated are for a stock equipped vehicle
• When running 37" tires use up-travel limiters part #611075 in the front
• Recommended crash bars part #42000 on non-Sasquatch equipped vehicles when running 35" tires
• When running 37" tires crash bar removal may be required but is not recommended
• Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install
• An iOS device is required to run the ICON Intelligent Control app
• Also requires installation of the applicable IIC kit and CDEV rear shocks
• Due to increased wheel travel and lift height, ICON upper control arms with Delta Joint Pro (part numbers 48400DJ or 48500DJ) are recommended; other aftermarket front UCAs may not be compatible. Verify fitment and cycle suspension to check for ball joint bind to avoid component failure or injury
• Fitment testing performed with ICON and OEM steering components; certain aftermarket steering components may not be compatible due to tight clearances to front coilovers
• Bronco Everglades lift height range with these coilovers: 1.5–2.5" over stock

Icon Vehicle Dynamics 48700E 2.5 VS Remote Reservoir CDEV Front Coilover Reservoir Adjustable Shock Lift 1.5-4" Ford Bronco 21-26 Pair - Features