Icon Vehicle Dynamics 48700C 2.5 VS Remote Reservoir CDCV Front Coilover Reservoir Adjustable Shock Lift 1.5-4" Ford Bronco 21-26 Pair

ICON Vehicle Dynamics V.S. 2.5 Series Remote Reservoir Front Coilover Shocks with CDCV

ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir front coilover shocks with CDCV are a vehicle-specific upgrade for the 2021–2026 Ford Bronco. These adjustable coilovers provide increased travel and lift options to accommodate larger wheel and tire combinations, improved heat dissipation and reduced damper fade under hard use, and external compression damping adjustment for on- and off-road tuning.

• Lift adjustability: Up to 3–4" on non-Sasquatch Broncos; 2–3" over stock on Sasquatch-equipped Broncos.
• Increased wheel travel: Up to 11.5" for improved off-road articulation and ride quality.
• Vehicle-specific tuning: Shock length and valving matched for the Ford Bronco to maximize travel and control.
• Remote reservoirs: Increased oil volume and surface area for better heat dissipation and resistance to cavitation.
• Compression Damping Control Valve (CDCV): External compression adjustment with 10 settings for precise tuning.
• 2.5" shock body: Larger body and increased piston area for superior damping performance.
• ICON-engineered coil springs for application-specific rates.
• 6061 aircraft-grade aluminum CNC-machined components and corrosion-resistant plated shock bodies with 7/8" diameter shafts.
• Rod end bearings for extended longevity and minimal deflection.
• High-strength alloy CNC-machined lower bar pin.
• Fully rebuildable and re-tunable design.
• Bolt-on installation: No drilling, cutting, or welding required.
• When paired with ICON 2.5 Series rear coilovers, front-to-rear control is balanced for the best overall driving experience.

Notes:

• OEM wheels & tires fitment with Sasquatch package: Yes.
• OEM wheels & tires fitment without Sasquatch package: No.
• Recommended aftermarket wheels with Sasquatch package: 17x8.5" w/ 4.75" backspace (0mm offset); 18x9" w/ 5.00" backspace (0mm offset); 20x9" w/ 5.00" backspace (0mm offset).
• Recommended aftermarket wheels without Sasquatch package: 17x8.5" w/ 5.75" backspace (25mm offset); 18x9" w/ 6.00" backspace (25mm offset).
• Recommended tires with Sasquatch package: 35x12.50" (37" tires require coilover bump stop spacers and additional precautions).
• Recommended tires without Sasquatch package: 35x12.50" (37" tires require coilover bump stop spacers and trimming/modifications; high-clearance crash bars recommended).
• Will not fit Bronco Raptor.
• Factory upper control arms will not align properly past 2.5" of lift; above 2.5" an aftermarket upper control arm is recommended.
• Shocks are fully serviceable; coilover heights indicated are for a stock-equipped vehicle.
• When running 37" tires use up-travel limiters in the front.
• Recommended crash bars on non-Sasquatch vehicles when running 35" tires.
• When running 37" tires, crash bar removal may be required but is not recommended.
• Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install.
• Due to increased wheel travel and lift height, ICON upper control arms with Delta Joint Pro are recommended; other aftermarket front upper control arms may not be compatible. Installer must verify fitment and cycle the suspension to check for ball joint bind to avoid component failure or injury.
• Fitment testing performed with ICON and OE steering components; certain aftermarket steering components may not be compatible due to tight clearances.
• Bronco Everglades lift height range: approximately 1.5–2.5" over stock.

Icon Vehicle Dynamics 48700C 2.5 VS Remote Reservoir CDCV Front Coilover Reservoir Adjustable Shock Lift 1.5-4" Ford Bronco 21-26 Pair - Features