Icon Vehicle Dynamics 48700 2.5 VS Remote Reservoir Front Coilover Reservoir Shock Lift 1.5-4" Ford Bronco 21-26 Pair

ICON Vehicle Dynamics V.S. 2.5 Series Remote Reservoir Front Coilovers

ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir front coilovers are a performance upgrade for 2021–2026 Ford Bronco models. Designed with a larger 2.5" shock body, vehicle-specific shock length and valving, and increased piston area, these coilovers deliver maximum travel, improved ride quality, and enhanced suspension performance on- and off-road. Remote reservoirs increase oil volume and heat dissipation to resist overheating and cavitation under hard use. When paired with ICON 2.5 Series rear coilovers, front and rear control are balanced for an improved overall driving experience.

• Increased wheel travel: Up to 11.5" travel over stock for enhanced off-road capability and comfort.
• Adjustable lift: Up to 3–4" of front lift on Broncos without the Sasquatch package, or 2–3" over stock on Sasquatch-equipped Broncos to accommodate larger, more aggressive wheel and tire combinations.
• Remote reservoirs: Maintain cooler operating temperatures during extended off-road use to reduce damper fade.
• Engineered coil springs: ICON-designed springs tuned for the V.S. 2.5 Series.
• High-quality construction: 6061 aircraft-grade aluminum CNC-machined components and corrosion-resistant plated shock bodies with 7/8" diameter shafts.
• Durable hardware: Rod end bearings for extended longevity and minimal deflection, and a high-strength alloy CNC-machined lower bar pin.
• Serviceability: Fully rebuildable and re-tunable for long-term maintenance and performance tuning.
• Simple installation: 100% bolt-on – no drilling, cutting, or welding required.

Notes

• OEM wheels and tires fit with the Sasquatch package; OEM wheels and tires do not fit without the Sasquatch package.
• Recommended aftermarket wheel sizes with Sasquatch: 17x8.5 with 4.75" backspace (0mm offset), 18x9 with 5.00" backspace (0mm offset), or 20x9 with 5.00" backspace (0mm offset).
• Recommended aftermarket wheel sizes without Sasquatch: 17x8.5 with 5.75" backspace (25mm offset) or 18x9 with 6.00" backspace (25mm offset).
• Recommended tire size with Sasquatch: 35 x 12.50" (37" tires require up-travel limiters and minor trimming).
• Recommended tire size without Sasquatch: 35 x 12.50" (high-clearance crash bars are recommended; 37" tires require up-travel limiters and additional trimming/modifications).
• Will not fit Bronco Raptor.
• Factory upper control arms will not align properly past 2.5" of lift. Above 2.5" of lift, an aftermarket upper control arm is recommended.
• Shocks are fully serviceable. Coilover heights indicated are for a stock-equipped vehicle.
• When running 37" tires, use front up-travel limiters.
• When running 35" tires on non-Sasquatch vehicles, high-clearance crash bars are recommended. Removal of crash bars for 37" tires may be required but is not recommended.
• Installation requires recalibration of Advanced Driver Assistance Systems (ADAS).
• Due to increased wheel travel and lift height, ICON upper control arms with Delta Joint Pro are recommended. Other aftermarket front upper control arms may not be compatible; installers must verify fitment. Failure to cycle the suspension and check for ball joint bind may lead to component failure or injury.
• Fitment testing was performed with ICON and OEM steering components. Certain aftermarket steering components may not be compatible due to tight clearances.
• Bronco Everglades models will have a lift height range of approximately 1.5–2.5" over stock.

Icon Vehicle Dynamics 48700 2.5 VS Remote Reservoir Front Coilover Reservoir Shock Lift 1.5-4" Ford Bronco 21-26 Pair - Features