$0
The 1998-2007 Toyota Land Cruiser 100 Series uses a compact torsion bar IFS front suspension that requires careful packaging and control, especially when lift is added. The ICON Stage 2 2.5" reservoir shock system is engineered to handle increased spring energy from torsion bar lift while maximizing suspension travel and performance for 0-3" of lift (aftermarket upper control required).
Designed for demanding off-road use: remote reservoirs and larger 2.5" shock bodies increase consistent damping duration and reduce operating temperatures during extended use. Heavy-duty upper stem bushings and a lower spherical rod end bearing minimize deflection for precise suspension control under high loads.
Notes
| Brand | Icon Vehicle Dynamics |
| Note | Kits consist of shocks only. Additional components required to achieve desired lift height over stock |
| Note | Requires Aftermarket front Upper Control Arms |
| Note | Any kit with part# 57802P/CP in it with stock rear coil springs vehicle will ride in bump zone of shock. Stock or some aftermarket coil springs may come unseated at full droop |
| Note | Not compatible with AHC equipped models |
| Series | 2.5 VS Remote Reservoir |
| Installation side | Front, Rear |
| Lift Height, inch | 0-3" |
| Type Adjusters | Non Adjustable |
| Reservoir | Yes |
| Quantity | Set of 4pcs |
| Box Height | 9 in |
| Box Width | 10 in |
| Box Length | 39 in |
| Box Weight | 55 lbs |
| UPCCode | 840103417165 |
|
Fitment
Show all |
2005||Toyota||Land Cruiser 100, 2007||Toyota||Land Cruiser 100, 1998||Toyota||Land Cruiser 100, 1999||Toyota||Land Cruiser 100, 2000||Toyota||Land Cruiser 100, 2001||Toyota||Land Cruiser 100, 2002||Toyota||Land Cruiser 100, 2003||Toyota||Land Cruiser 100, 2004||Toyota||Land Cruiser 100, 2006||Toyota||Land Cruiser 100
|
