Icon Vehicle Dynamics K53431T Stage 11 Suspension Lift Kit Lift 1.25-3" Toyota 4Runner 25-26

ICON Vehicle Dynamics

The Stage 11 suspension system for 2025–2026 Toyota 4Runner is engineered to increase wheel travel and damping for improved vehicle control and ride quality on- and off-road. The system includes vehicle-specific tuned 2.5 Series coilover shocks with remote reservoirs and ICON-engineered coil springs. Remote reservoirs increase shock oil volume and heat dissipation to resist overheating and damper fade. Stage 11 also features ICON Compression Damping Dual Speed (CDXS) valves with independent high- and low-speed compression adjustment and 10 detented settings for each. Coilover lengths are optimized for 2WD models to maximize available front wheel travel.

The kit includes tubular upper control arms to correct front-end geometry, add caster, and improve component clearance. The OE ball joint is replaced with a serviceable, rebuildable Delta Joint Pro to allow full bump and droop travel while eliminating bind. The rear uses a dual-rate coil design for a comfortable on-road ride with firm overload resistance off-road, providing a level stance with .75" of rear lift. Tubular rear links use dual-durometer greaseless bushings and high-quality rod end bearings for articulation while isolating noise and vibration. An adjustable billet aluminum rear track bar recenters the rear axle and allows on-vehicle fine adjustment. Vehicle-specific 2.5 Aluminum Series remote reservoir rear shocks with integrated bump zones balance damping performance front to rear.

• Vehicle-specific 2.5 Series front coilovers with remote reservoirs for superior damping and improved shock cooling
• Increased wheel travel and improved ride quality over stock
• ICON CDXS on all shocks for independent high- and low-speed compression adjustment (10 detents each)
• Adjustable front lift from 1.25" to 3" over stock
• Coilover lengths optimized for 2WD to maximize front wheel travel
• Tubular upper control arms for added strength, durability, and alignment correction
• Patented Delta Joint Pro serviceable joint with 90° total articulation
• 6061 aircraft-grade aluminum CNC components
• Corrosion-resistant plated shock bodies with 7/8" shafts
• Dual-rate rear coil springs for improved ride quality and .75" of rear lift
• Tubular rear links with greaseless bushings and rod end bearings for articulation and durability
• On-vehicle adjustable billet aluminum rear track bar for precise rear axle centering
• 2.5 Aluminum Series remote reservoir rear shocks with 7/8" shafts and vehicle-specific valving

Notes

• OEM wheels & tires fitment: Yes
• Recommended aftermarket wheels: 17x8.5 with 6.32" backspace / 40mm offset
• Recommended aftermarket tires: 33" x 11.50" (larger tires may fit but fender trimming and modifications may be required)
• Use up to 33" x 11.50" tires
• Only fits 4WD models
• Only fits 2WD models. Installation onto 4WD models will result in damage to front axles.
• Advertised lift heights based on models equipped with gasoline engine
• Advertised lift height ranges are for a stock equipped vehicle; increasing vehicle weight due to accessories will alter lift range
• Shocks are fully serviceable
• Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles
• Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install
• Raises front: 1.25"–3"
• Raises rear: 0.75"

Icon Vehicle Dynamics K53431T Stage 11 Suspension Lift Kit Lift 1.25-3" Toyota 4Runner 25-26 - Features