Icon Vehicle Dynamics K53253T Stage 3 Suspension Lift Kit Lift 3-4.25" Toyota Sequoia 23-26

ICON Stage 3 3.0 Suspension System for 2023–2025 Toyota Sequoia

The ICON Stage 3 3.0 complete suspension system upgrades ride quality, off‑road capability, and wheel/tire clearance for 2023–2025 Toyota Sequoia models. The system centers on ICON 3.0 Series CDEV remote‑reservoir front coilovers and an integrated suite of engineered components to improve alignment, articulation, and front ride height range for fitting up to 35" tires with minor fender trimming.

• 3.0 Series remote‑reservoir front coilovers with CDEV — Active electronic compression damping with in‑vehicle adjustment and improved cooling for consistent damping performance.
• Adjustable front ride height — Approximately 3.0"–4.25" of lift over stock when used with the supplied tubular upper control arms (submodel dependent).
• Increased piston area and Bump Zone — Larger piston area for improved control in the ride zone and a multi‑stage hydraulic Bump Zone that increases bottom‑out resistance through the last portion of travel.
• ICON Intelligent Control (IIC) — Onboard sensor‑based system that actively adjusts compression damping via the CDEV valves. Wireless control via the IIC app and configurable automatic tuning.
• Tubular upper control arms (UCAs) — Corrected front geometry with added caster and improved component clearance; includes serviceable, rebuildable Delta Joint PRO for full bump and droop travel and reduced bind.
• Sway bar drop brackets — Reduce sway bar link bind and allow full wheel travel without overstressing OE components.
• Tubular rear upper and lower links — DOM tubing construction with PTFE‑lined rod ends and multi‑durometer bushings for increased articulation, reduced deflection, and adjustable link length.
• Dual‑rate rear coil springs — Softer ride rate with a firmer overload rate for on‑road comfort and improved bottoming resistance; designed to provide level stance front‑to‑rear depending on stock suspension package.
• Billet rear adjustable track bar — Double adjuster threads for on‑vehicle fine adjustment to properly center the axle with lifted ride height.
• 2.5 Aluminum Series rear remote‑reservoir shocks with CDEV — Larger diameter rear shocks with remote reservoirs and an internal Bump Zone for balanced front‑to‑rear performance. All ICON shocks are fully rebuildable and re‑tunable.

Fitment and performance highlights

• Designed specifically for 2023–2025 Toyota Sequoia models.
• Supports up to 35" x 12.50" tires with minor fender trimming on most configurations.
• Recommended aftermarket wheel widths: 17x8.5" or 18x9" with approximately 25mm offset.

Notes

• Shocks are fully serviceable.
• Advertised lift height ranges are for stock‑equipped vehicles; added vehicle weight (accessories, armor, etc.) will alter effective lift range.
• Most Sequoia submodels will achieve roughly 3.0"–4.5" front lift and 2" rear lift over stock. Sequoia models equipped with TRD Off‑Road or TRD Pro packages typically see about 1.0"–2.5" front lift and remain near stock height in the rear.
• Sequoia models with automatic leveling headlights or load‑leveling rear air suspension may require additional components for proper integration; some load‑leveling systems are not compatible.
• Not compatible with vehicles equipped with Adaptive Variable Suspension (AVS).
• For certain 4WD models without the TRD Off‑Road package, additional drivetrain modifications or differential drop components may be recommended to prevent front axle stress or damage.
• Recalibration of Advanced Driver Assistance Systems (ADAS) is required after installation.
• An iOS‑operated device is required to run the ICON Intelligent Control (IIC) app for wireless configuration and operation.

Icon Vehicle Dynamics K53253T Stage 3 Suspension Lift Kit Lift 3-4.25" Toyota Sequoia 23-26 - Features