Icon Vehicle Dynamics K53252TD Stage 2 Suspension Lift Kit Lift 3-4.25" Toyota Sequoia 23-26

ICON Vehicle Dynamics Stage 2 3.0 Complete Suspension System — 2023-2025 Toyota Sequoia

The ICON Vehicle Dynamics Stage 2 3.0 complete suspension system upgrades the Sequoia with remote-reservoir 3.0 Series shocks and CDXS front coilovers to provide improved on- and off-road performance, expanded ride height range, and better alignment for aggressive wheel and tire fitment.

This kit pairs 3.0 Series CDXS remote-reservoir front coilovers with matched 3.0 Series remote-reservoir rear shocks to deliver increased shock travel, greater heat dissipation, and independent high- and low-speed compression adjustments. The coilovers offer substantial lift adjustability when used with the included tubular upper control arms, allowing for larger wheel and tire combinations while maintaining stable on-road manners and controlled off-road performance.

The system includes strengthened front and rear suspension components: tubular front upper control arms with the serviceable Delta Joint PRO for full bump and droop travel, tubular rear upper and lower links with PTFE-lined rod ends and multi-durometer bushings for improved articulation and reduced deflection, a billet adjustable rear track bar for axle centering, sway bar drop brackets to reduce link bind, and dual-rate rear coil springs that balance on-road comfort with off-road bottoming resistance.

• Vehicle-specific design for 2023–2025 Toyota Sequoia
• 3.0 Series front coilovers with remote reservoirs and CDXS for superior damping and shock cooling
• Adjustable front ride height: approximately 3.0"–4.25" over stock (varies by submodel and equipment)
• All shocks equipped with CDXS — independent high- and low-speed compression adjustment (10 detented settings each)
• Tubular upper control arms for added strength, improved alignment, and increased suspension clearance
• Delta Joint PRO ball joint design for serviceability and full articulation without bind
• Sway bar drop brackets to minimize link bind and allow full wheel travel
• Tubular rear links with PTFE-lined rod ends and maintenance-free bushings for improved articulation and pinion angle adjustment
• Dual-rate rear coil springs provide a softer ride with a firmer overload rate; yields approximately 2" rear lift on non-TRD models and 0" on TRD Off-Road models to maintain a level stance
• On-vehicle adjustable billet rear track bar for precise axle centering and easy length adjustment
• All ICON shocks are rebuildable and re-tunable

Key performance improvements: increased shock travel and surface area for improved heat dissipation and fade resistance, enhanced bottom-out protection via multi-stage bump-valve behavior, and tunable compression for dialing in handling response and overall ride aggressiveness.

Fitment & wheel/tire guidance: OEM wheels and tires fitment: yes. Recommended tire size up to 35 x 12.50 (minor fender trimming or modifications may be required). Recommended aftermarket wheel offset around +25 mm.

Notes:

• Shocks are fully serviceable. Lift heights referenced are for stock-equipped vehicles; added vehicle weight from accessories will affect actual lift range.
• Not compatible with vehicles equipped with load-leveling rear height control air suspension.
• Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles.
• Some configurations (for example, vehicles with automatic leveling headlights or certain skid plates) may require additional components for proper fitment.
• Requires recalibration of Advanced Driver Assistance Systems (ADAS) after installation.
• Typical lift ranges by submodel: most Sequoia submodels see approximately 3.0"–4.5" front lift and 2" rear lift; TRD Off-Road and TRD Pro submodels typically see 1.0"–2.5" front lift and remain at stock height in the rear.

Icon Vehicle Dynamics K53252TD Stage 2 Suspension Lift Kit Lift 3-4.25" Toyota Sequoia 23-26 - Features