Icon Vehicle Dynamics K53252 Stage 2 Suspension Lift Kit Lift 3-4.25" Toyota Sequoia 23-26

ICON Vehicle Dynamics Stage 2 3.0 – Toyota Sequoia (2023–2025)

The ICON Vehicle Dynamics Stage 2 3.0 complete suspension system for the 2023–2025 Toyota Sequoia upgrades to 3.0 Series remote reservoir rear shocks and 3.0 Series CDCV remote reservoir front coilovers. This kit improves on- and off-road performance with adjustable compression damping, corrected alignment geometry, and increased front and rear lift range for proper stance and fitment of larger tires.

The 3.0 Series front coilovers feature externally adjustable CDC valves with 10 compression settings, increased piston surface area for improved damping, and extended travel for enhanced control on extreme terrain while remaining composed on-road. When used with the billet front upper control arms, the front suspension allows increased lift adjustability to accommodate more aggressive wheel and tire combinations.

The billet aluminum front upper control arms correct front-end geometry, provide on-vehicle camber and caster adjustment, and use a serviceable high-articulation joint to allow full bump and droop travel without binding. Sway bar drop brackets reduce sway bar link bind through suspension travel, enabling full wheel travel without overstressing OE components.

Billet aluminum adjustable rear upper and lower links use PTFE-lined rod ends and multi-durometer bushings for increased articulation, reduced deflection, and maintenance-free operation. Dual-rate rear coil springs deliver a comfortable on-road ride with firm overload resistance for off-road bottoming control, yielding vehicle-specific rear ride height changes for a level stance.

The billet adjustable rear track bar centers the axle after lift and allows on-vehicle length fine adjustment. 3.0 Series rear remote reservoir shocks increase internal oil volume and external surface area for better heat dissipation and fade resistance, and include CDC valves for ten compression settings. All shock absorbers in the system are rebuildable and re-tunable.

• Vehicle fit: Designed for 2023–2025 Toyota Sequoia
• Front coilovers: 3.0 Series CDCV remote reservoir coilovers with adjustable compression and extended travel
• Front lift adjustability: Approximately 3.0"–4.25" of front lift over stock when used with billet front upper control arms (vehicle dependent)
• Rear shocks: 3.0 Series remote reservoir rear shocks matched to front coilovers for balanced control
• Billet components: Billet aluminum front upper control arms and billet rear upper/lower links for improved strength and adjustability
• High-articulation joint: Serviceable, rebuildable joint for full bump and droop travel
• Sway bar drop brackets: Reduce link bind and allow full wheel travel
• Dual-rate rear coils: Softer ride rate with firmer overload for bottoming resistance and off-road performance
• Adjustable rear track bar: Centers axle and allows on-vehicle fine adjustment
• Rebuildable shocks: All shock absorbers are serviceable and re-tunable

Notes:

• OEM wheels and tires will fit; recommended aftermarket wheel sizes include 17x8.5" (approx. 5.75" backspacing / 25mm offset) and 18x9" (approx. 6" backspacing / 25mm offset).
• Recommended maximum tire: 35 x 12.50" (minor fender trimming and modifications may be required).
• Shocks are fully serviceable; lift heights indicated are for a stock-equipped vehicle and may change with added vehicle weight or accessories.
• Typical lift ranges: non-TRD Sequoia models achieve roughly 3.0"–4.25" front lift and ~2" rear lift; TRD Off-Road and TRD Pro submodels typically see ~1.0"–2.25" front lift and no rear lift. Exact results vary by submodel and options.
• 4WD models without the TRD Off‑Road package may require a differential drop or axle-related modifications to prevent front axle stress; this is not required for TRD Pro models.
• Vehicles equipped with Adaptive Variable Suspension (AVS) may be incompatible with this system.
• Vehicles with automatic leveling headlights or rear load‑leveling air suspension may require additional components or different fitment; consult vehicle-specific fitment guidance.
• Some vehicle configurations (for example, those with specific skid plates or factory equipment) may require additional components for proper installation.
• Requires recalibration of Advanced Driver Assistance Systems (ADAS) after installation.

Icon Vehicle Dynamics K53252 Stage 2 Suspension Lift Kit Lift 3-4.25" Toyota Sequoia 23-26 - Features