Icon Vehicle Dynamics K53251TS Stage 1 Suspension Lift Kit Lift 3-4.25" Toyota Sequoia 23-26

ICON Vehicle Dynamics Stage 1 3.0 Suspension System — 2023-2025 Toyota Sequoia

The ICON Stage 1 3.0 complete suspension system upgrades the 2023–2025 Toyota Sequoia with 3.0 Series front coilovers and a balanced rear tune for improved on‑ and off‑road performance. The system increases shock piston area and travel, adds externally adjustable compression damping (CDC Valves), and includes tubular upper control arms, a billet rear link combo, adjustable rear track bar, dual‑rate rear coil springs, sway bar drop brackets, and remote reservoir rear shocks for consistent damping under heavy use.

Performance highlights: adjustable front ride height for larger wheel and tire fitment, increased bottom‑out resistance via a multi‑stage Bump Zone, rebuildable shock construction, and vehicle‑specific shock lengths to maximize travel and control.

• Vehicle fitment: 2023–2025 Toyota Sequoia
• Front shocks: VS 3.0 Series remote reservoir coilovers with CDC Valves — adjustable compression damping and 3.0 Series piston sizing for improved control
• Rear shocks: 2.5 Aluminum Series remote reservoir shocks with CDC Valves and internal Bump Zone for added bottom‑out control
• Adjustability: externally adjustable CDC Valves offering multiple compression settings
• Front lift range: up to 3.0–4.25" over stock when used with ICON tubular front upper control arms (varies by submodel)
• Rear lift: dual‑rate coil springs providing ~4" rear lift on non‑TRD Sequoia or ~2" rear lift on TRD Off‑Road and TRD Pro models
• Tubular upper control arms: corrected front geometry, additional caster, improved component clearance, and serviceable Delta Joint PRO for full bump/droop travel
• Rear links: tubular adjustable upper and lower links with PTFE‑lined rod ends and multi‑durometer bushings for articulation and noise‑free operation
• Track bar: billet adjustable rear track bar for axle centering with on‑vehicle length adjustment
• Sway bar drop brackets: reduce link bind and allow full wheel travel without overstressing OE components
• All shocks: fully rebuildable and re‑tunable

Key benefits: improved on‑road manners and off‑road capability, greater shock cooling and consistent damping with remote reservoirs, increased travel and bottom‑out resistance, and a suspension tune that supports up to 35" tires with proper wheel/tire and trim considerations.

Notes:

• Shocks are fully serviceable; advertised lift heights are based on a stock‑equipped vehicle and will change with added vehicle weight or accessories.
• Most Sequoia submodels will see approximately 3–4.25" front lift and 4" rear lift over stock. TRD Off‑Road and TRD Pro submodels typically see 1–2.25" front lift and 2" rear lift. Shorter rear ride heights may be achieved with alternate kit options.
• Some configurations require additional parts: vehicles with automatic leveling headlights or load‑leveling rear air suspension require part 55153; certain TRD skid plate installations require part 55164; 4WD models without the TRD Off‑Road package may require diff drop part 55156 or TRD axle components to prevent front axle damage. Verify required parts for your specific vehicle configuration before installation.
• Not compatible with vehicles equipped with Load‑Leveling Rear Height Control Air Suspension or Adaptive Variable Suspension (AVS).
• Requires recalibration of Advanced Driver Assistance Systems (ADAS) after installation.
• Recommended aftermarket wheel offset is approximately 25 mm. Tire fitment up to 35 x 12.50 may be possible with minor fender trimming or modifications.

Icon Vehicle Dynamics K53251TS Stage 1 Suspension Lift Kit Lift 3-4.25" Toyota Sequoia 23-26 - Features