Icon Vehicle Dynamics K53237 Stage 7 Suspension Lift Kit Lift 3-4.5" Toyota Sequoia 23-26

ICON Stage 7 Complete Suspension System — 2023-2025 Toyota Sequoia

The ICON Stage 7 suspension system for the 2023–2025 Toyota Sequoia upgrades rear damping to 2.5 Aluminum Series remote reservoir shocks and pairs them with 2.5 Series remote reservoir front coilovers, dual-rate rear coils, billet aluminum upper control arms, and a front sway bar drop kit. The system increases front-end lift range for proper stance and fitment of up to 35" tires, improves shock cooling and travel, and refines front-end geometry for better on- and off-road performance.

The front coilovers offer adjustability and up to 3–4.5" of lift over stock when used with the billet upper control arms, delivering increased travel (up to ~40% more than stock) and superior damping. Remote reservoirs increase oil volume and heat dissipation to resist overheating and damper fade under heavy use.

The billet aluminum upper control arms correct front-end geometry, provide additional caster and camber adjustment on-vehicle, and include the serviceable Delta Joint Pro for full bump and droop travel without bind. Sway bar drop brackets minimize link bind through suspension travel to allow full wheel articulation without overstressing OE components.

• Vehicle specific design for 2023–2025 Toyota Sequoia
• 2.5 Series front coilovers with remote reservoirs for improved damping, cooling, and adjustable ride height
• Adjustable front lift: 3–4.5" over stock (varies by submodel and equipment)
• Billet aluminum upper control arms with on-vehicle caster/camber adjustment
• Delta Joint Pro provides 90° total articulation and is serviceable/rebuildable
• Sway bar drop brackets to reduce link bind and allow full wheel travel
• Dual-rate rear coil springs for on-road comfort and off-road bottoming resistance
• 2.5 Aluminum Series rear remote reservoir shocks tuned to complement the front coilovers for balanced vehicle control
• All ICON shocks are fully rebuildable and re-tunable

Recommended fitment

• Maximum tire: Up to 35" x 12.50" (minor fender trimming or modifications may be required)
• Recommended aftermarket wheel offset: ~25 mm
• OEM wheels & tires: Compatible

Typical lift results by submodel

• Non-TRD Sequoia: Front 3–4.5" lift, Rear ~2" lift (level stance front-to-rear)
• TRD Off-Road / TRD Pro: Front 1–2.5" lift, Rear remains at stock height

Key installation and compatibility notes

• Shocks are fully serviceable. Lift heights indicated are for a stock-equipped vehicle.
• Advertised lift ranges assume stock curb weight; adding accessories or payload can change achieved lift.
• Not compatible with vehicles equipped with load-leveling rear height control air suspension.
• Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles.
• Requires recalibration of Advanced Driver Assistance Systems (ADAS) after installation.
• For certain 4WD models without the TRD Off-Road package, a differential drop or TRD axles are recommended to avoid front axle stress; not required for TRD Pro models.
• If equipped with the TRD aluminum skid plate, additional modification or an additional part may be required.
• Most Sequoia submodels achieve the stated front and rear lift ranges; submodel and equipment variations (TRD packages, AVS, accessories) will affect final ride height.

Icon Vehicle Dynamics K53237 Stage 7 Suspension Lift Kit Lift 3-4.5" Toyota Sequoia 23-26 - Features