Icon Vehicle Dynamics K53236S Stage 6 Suspension Lift Kit Lift 3-4.5" Toyota Sequoia 23-26

ICON Stage 6 Complete Suspension System for 2023-2025 Toyota Sequoia

The ICON Stage 6 suspension system upgrades the 2023-2025 Toyota Sequoia with remote-reservoir 2.5 Series front coilovers, billet aluminum upper control arms, dual-rate rear coils, and 2.0 Aluminum Series remote-reservoir rear shocks. This combination increases shock oil capacity and heat dissipation for improved on- and off-road performance, greater suspension travel, and the ability to fit larger wheel and tire combinations while maintaining ride quality.

System highlights

• Vehicle fitment: Designed specifically for 2023-2025 Toyota Sequoia
• Front coilovers: 2.5 Series remote-reservoir adjustable coilovers provide increased piston area, improved valving, and up to 40% more travel versus stock
• Adjustable front lift: Front ride height adjustable approximately 3–4.5" over stock when used with the billet upper control arms
• Upper control arms (UCAs): Billet aluminum UCAs correct front-end geometry, add on-vehicle camber and caster adjustment, and improve suspension clearance
• Delta Joint PRO: Serviceable, rebuildable joint provides full bump and droop travel while eliminating bind
• Sway bar drop brackets: Reduce sway bar link bind through suspension travel for freer movement and full wheel travel
• Rear springs: Dual-rate rear coil springs deliver a comfortable on-road feel with a firmer overload rate for bottoming resistance and off-road performance; designed for taller rear ride heights
• Rear shocks: V.S. 2.0 Aluminum Series remote-reservoir rear shocks tuned for the Sequoia to provide balanced damping with the front coilovers
• Serviceable: All ICON shock absorbers are fully rebuildable and re-tunable

Performance outcomes

• Tire fitment: Supports up to 35 x 12.50 tires (minor fender trimming or modifications may be required)
• Ride height (typical): Non-TRD Sequoia — approximately 3–4.5" front lift and 4" rear lift; TRD Off-Road and TRD Pro — approximately 1–2.5" front lift and 2" rear lift
• Balanced control: Remote reservoirs increase oil volume and cooling to resist damper fade under heavy use, maintaining consistent damping performance

Notes

• Shocks are fully serviceable.
• Advertised lift height ranges apply to stock-equipped vehicles; added vehicle weight from accessories will alter final lift range.
• Not compatible with vehicles equipped with Load‑Leveling Rear Height Control air suspension.
• Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles.
• Requires recalibration of Advanced Driver Assistance Systems (ADAS) after installation.
• For 4WD models without the TRD Off-Road package, use a differential drop (Part #55156) or Toyota TRD axles (Part #434200C020 driver / 434100C020 passenger) to prevent front axle damage; not required for TRD Pro.
• If the vehicle is equipped with the TRD aluminum skid plate, Part #55164 is also required.
• Most submodels will see approximately 3–4.5" of front lift and 4" rear lift; TRD Off-Road and TRD Pro submodels will generally see 1–2.5" front and 2" rear. For shorter rear ride heights, consider kit part number K53236.
• Recommended aftermarket wheel offset ~25 mm; typical recommended wheel sizes/backspace for fitment considerations include 17x8.5" (5.75" backspace) and 18x9" (6" backspace).

Icon Vehicle Dynamics K53236S Stage 6 Suspension Lift Kit Lift 3-4.5" Toyota Sequoia 23-26 - Features