The ICON Stage 6 suspension system for the 2023-2025 Toyota Sequoia upgrades the front 2.5 Series coilovers to remote reservoir versions, delivering improved on- and off-road performance, greater shock heat dissipation, improved alignment range, and increased front lift to accommodate up to 35" tires.
Front suspension features vehicle-specific 2.5 Series remote reservoir coilovers with adjustable ride height, a larger shock body and piston area for increased travel (up to ~40% more than stock), and improved damping consistency under heavy use.
Upper control arms are billet aluminum, designed to correct front-end geometry, provide increased caster and camber adjustment, and improve suspension component clearance. The OE ball joint is replaced by the serviceable and rebuildable Delta Joint PRO to allow full bump and droop travel while eliminating bind.
Sway bar drop brackets reduce sway bar link bind through the suspension travel range, allowing freer suspension movement and full wheel travel without overstressing OE components.
Rear suspension uses dual-rate coil springs that combine a softer ride height rate with a firmer overload rate for on-road comfort and excellent bottoming resistance off-road. V.S. 2.0 Aluminum Series remote reservoir rear shocks are tuned to match the front coilovers for balanced vehicle control and consistent damping under heavy use. All ICON shock absorbers are fully rebuildable and re-tunable.
Recommended wheel & tire guidance: Up to 35 x 12.50 tires may be used with minor fender trimming or modifications. Typical recommended aftermarket wheel offset is around 25 mm. Specific wheel widths and backspacing will vary by wheel design and vehicle setup.
Notes:
| Note | Also Requires Part Number 55164 |
| Note | Without Adaptive Variable Suspension (AVS) |
| Note | Without TRD Off Road Package |
|
Submodel
Show all |
Limited, Platinum, SR5, TRD Pro, 1794 Edition, Capstone
|
| Series | Stage 6 |
| Installation side | Front, Rear |
| Lift Height, inch | 3-4.5" |
| Drive Type | 4WD, RWD |
| Brand | Icon Vehicle Dynamics |
| Note | Also Requires Part Number 55156 |
| Box Weight | 149 lbs |
| Box Length | 27 in |
| Box Width | 12 in |
| Box Height | 8 in |
| UPCCode | 840103421971 |
|
Fitment
Show all |
2023||Toyota||Sequoia, 2024||Toyota||Sequoia, 2025||Toyota||Sequoia, 2026||Toyota||Sequoia
|
