Icon Vehicle Dynamics K53235TS Stage 5 Suspension Lift Kit Lift 3-4.5" Toyota Sequoia 23-26

ICON Vehicle Dynamics

The Stage 5 complete suspension system for the 2023-2025 Toyota Sequoia upgrades the rear shocks to 2.0 Aluminum Series remote reservoir versions and includes dual-rate rear coils, a 2.5 Series internal reservoir front coilover, tubular front upper control arms, and a front sway bar drop kit. The system improves on- and off-road performance, heat dissipation, alignment, and front-end lift height range for proper stance and fitment of up to 35" tires.

The VS 2.5 Series internal reservoir front coilovers provide adjustable front ride height and increased travel (up to ~40% more than stock), delivering superior ride quality and suspension performance on- and off-road.

The tubular upper control arm kit corrects front-end geometry with added caster and improved component clearance. The OE ball joint is replaced by the serviceable, rebuildable Delta Joint PRO to allow full bump and droop travel while eliminating bind.

Sway bar drop brackets reduce sway bar link bind through the suspension travel range, allowing freer suspension movement and full wheel travel without overstressing OE components.

Dual-rate rear coils provide a softer ride rate with a firmer overload rate for excellent on-road comfort, bottoming resistance, and off-road performance. These coils are designed for taller rear ride heights to achieve a level stance front to rear.

V.S. 2.0 Aluminum Series remote reservoir rear shocks are tailored for the 2023-2025 Sequoia. Remote reservoirs maintain consistent damping and cooler operating temperatures under heavy use, yielding balanced vehicle control when paired with the 2.5 Series front coilovers.

• Vehicle fit: 2023-2025 Toyota Sequoia
• Front dampers: 2.5 Series internal reservoir coilovers with adjustable ride height
• Front lift range: Adjustable — typically 3" to 4.5" over stock (depending on submodel and control arm configuration)
• Tubular upper control arms: Added strength, durability, and alignment correction
• Delta Joint PRO: Serviceable/rebuildable joint with increased articulation for full suspension travel
• Sway bar drop brackets: Reduce link bind and allow full wheel travel
• Rear coils: Dual-rate design for improved ride quality and bottoming resistance
• Rear lift: Typically 4" over stock (non-TRD) or 2" over stock (TRD Off-Road / TRD Pro)
• Rear shocks: 2.0 Aluminum Series remote reservoir shocks for improved heat dissipation and consistent damping
• Shocks: Fully rebuildable and re-tunable

Notes:

• Shocks are fully serviceable.
• Advertised lift heights are for a stock-equipped vehicle; increasing vehicle weight due to accessories will alter lift range.
• Not compatible with vehicles equipped with load-leveling rear height control air suspension.
• Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles.
• Requires recalibration of Advanced Driver Assistance Systems (ADAS) after installation.
• For 4WD models without the TRD Off-Road package, a diff drop or TRD axles are recommended to avoid front axle stress (additional components may be required).
• If equipped with the TRD aluminum skid plate, additional hardware may be required.
• OEM wheels and tires retain fitment; recommended aftermarket wheel sizes include 17x8.5" and 18x9" with approximately 25mm offset.
• Recommended aftermarket tire size: 35 x 12.50" (minor fender trimming and modifications may be required).
• Typical lift outcomes by submodel: non-TRD — front 3"–4.5", rear 4"; TRD Off-Road / TRD Pro — front 1"–2.5", rear 2".

Icon Vehicle Dynamics K53235TS Stage 5 Suspension Lift Kit Lift 3-4.5" Toyota Sequoia 23-26 - Features