Icon Vehicle Dynamics K53233 Stage 3 Suspension Lift Kit Lift 3-3.75" Toyota Sequoia 23-26

ICON Vehicle Dynamics Stage 3 Complete Suspension System — 2023-2025 Toyota Sequoia

The ICON Stage 3 suspension system is a complete kit for the 2023–2025 Toyota Sequoia that improves on- and off-road performance while providing front-end lift and leveling for up to 35" tires. The system pairs ICON V.S. 2.5 Series threaded-body coilovers up front with dual-rate rear coil springs and ICON V.S. 2.0 Aluminum Series rear shocks for a balanced ride and increased wheel travel.

Key components include:

• ICON V.S. 2.5 Series front coilovers with internal reservoirs and larger 2.5" shock bodies for improved damping, increased piston area, and up to ~40% more front wheel travel than stock.
• Adjustable front ride height — typically 3.0"–3.75" of lift over stock on most Sequoia submodels when used with OE upper control arms; lower ranges apply for TRD-equipped models.
• Sway bar drop brackets to reduce link bind and allow full suspension travel without overstressing OE components.
• Dual-rate rear coil springs that provide a compliant ride with a firmer overload rate for bottoming resistance; yields 2" rear lift on non-TRD Sequoia or 0" rear lift on TRD Off-Road/Pro models for a level stance.
• ICON V.S. 2.0 Aluminum Series rear shocks tuned to match the front coilovers for balanced vehicle control and improved day-to-day drivability.
• All ICON shock absorbers are fully rebuildable and re-tunable for long-term serviceability and performance tuning.

Benefits

• Increased front wheel travel and superior ride quality on- and off-road
• Front-end lift and leveling for larger, more aggressive wheel and tire combinations
• Reduced sway-bar link bind for smoother suspension articulation
• Balanced handling with matched front and rear valving

Fitment & recommended setup

• Vehicle-specific design for 2023–2025 Toyota Sequoia
• Allows fitment of up to 35" x 12.50" tires (minor fender trimming and modifications may be required)
• Recommended aftermarket wheel offset: 25 mm

Notes

• Shocks are fully serviceable. Lift heights indicated are for a stock-equipped vehicle.
• Advertised lift height ranges apply to stock-equipped vehicles; additional vehicle weight from accessories will affect actual lift range.
• Not compatible with vehicles equipped with load-leveling rear height control (air suspension).
• Do not exceed the recommended front lift height for the Sequoia (3.75") without ICON front upper control arms; exceeding recommended lift can cause improper wheel alignment and potential front axle damage on 4WD models.
• 4WD models without the TRD Off-Road package may require a differential drop or compatible axle solution to prevent front axle stress; not required for TRD Pro.
• Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles.
• Advanced Driver Assistance Systems (ADAS) recalibration is required after installation.
• If equipped with the TRD aluminum skid plate, an additional mounting part is required for fitment.
• Not compatible with OE TRD billet front upper control arms; vehicles with those arms require ICON Delta Joint Pro upper control arms for proper fitment.
• Most Sequoia submodels will see ~3.0"–3.75" of front lift and ~2" of rear lift over stock. TRD Off‑Road and TRD Pro submodels typically see ~1.0"–1.75" of front lift and remain at stock height in the rear. If taller rear ride heights are desired, a different kit is recommended.

Icon Vehicle Dynamics K53233 Stage 3 Suspension Lift Kit Lift 3-3.75" Toyota Sequoia 23-26 - Features