Icon Vehicle Dynamics K53231 Stage 1 Suspension Lift Kit Lift 0-2.13" Toyota Sequoia 23-26

ICON Vehicle Dynamics Stage 1 Suspension System — 2023–2025 Toyota Sequoia

The ICON Vehicle Dynamics Stage 1 complete suspension system for the 2023–2025 Toyota Sequoia is an entry-level performance suspension that improves on- and off-road capability while providing front-end lift and leveling for proper stance and fitment of up to 35" tires. The system pairs ICON 2.5 EXP Series front coilover-style shocks that use the factory coil springs with dual-rate rear coils and ICON 2.0 Aluminum Series rear shocks for a balanced, durable ride.

• Vehicle-specific design: Engineered for 2023–2025 Toyota Sequoia.
• 2.5 EXP Series front shocks: 2.5" diameter, fully rebuildable performance shock that reuses factory coil springs and hardware for economical lift and increased travel.
• Adjustable front ride height: Front lift adjustable from 0–2.13" over stock using a snap ring.
• Sway bar drop brackets included: Reduce bind in OE sway bar links to allow full wheel travel without overstressing components.
• Dual-rate rear coil springs: Provide a softer ride with a firmer overload rate for bottoming resistance and improved off-road performance; yields 2" of rear lift on non-TRD Off-Road Sequoia or 0" rear lift on TRD Off-Road equipped vehicles.
• 2.0 Aluminum Series rear shocks: Tuned to match the front EXP Series for balanced vehicle control and improved on-/off-road performance.
• Fully serviceable: All ICON shock absorbers are rebuildable and re-tunable.
• Tire and wheel fitment: Supports up to 35" x 12.50" tires (minor fender trimming or modifications may be required). Recommended aftermarket wheels: ICON Alloys 17x8.5" or 18x9" with approximately 25mm offset.

Notes:

• Shocks are fully serviceable. Lift heights indicated are for a stock-equipped vehicle.
• Advertised lift height ranges are for a stock-equipped vehicle; increasing vehicle weight due to accessories will alter lift range.
• Not compatible with vehicles equipped with load-leveling rear height control air suspension.
• Not compatible with TRD Pro models.
• For 4WD models without the TRD Off-Road package, ICON recommends using a differential drop or equivalent measure to prevent front axle damage; this is not required for TRD Pro models.
• Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles.
• Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install.
• If equipped with the TRD aluminum skid plate, an additional component may be required for proper fitment.
• Most Sequoia submodels will have a front lift height range of 0–2.13" over stock and 2" of rear lift over stock. Submodels equipped with the TRD Off-Road package will remain at stock height front and rear while benefiting from improved ride quality and suspension performance.

Icon Vehicle Dynamics K53231 Stage 1 Suspension Lift Kit Lift 0-2.13" Toyota Sequoia 23-26 - Features