Icon Vehicle Dynamics K53202 Stage 12 Suspension Lift Kit Lift 1.25-3.5" Toyota Tundra 22-26

ICON Vehicle Dynamics

The Stage 12 complete suspension system for the 2022–2026 Toyota Tundra pairs CDEV-equipped 2.5 Series remote-reservoir coilovers up front with 2.5 Series remote-reservoir rear shocks to deliver improved on- and off-road performance, increased wheel travel, and active electronic compression damping. ICON Intelligent Control (IIC) continuously monitors vehicle movement and adjusts the Compression Damping Electronic Valve (CDEV) at each shock for near-instant damping changes, with wireless configuration via the IIC app.

This kit includes billet aluminum upper control arms (UCAs) with serviceable and rebuildable Delta Joint PRO ball joints, sway bar drop brackets to reduce link bind, and vehicle-specific shock valving and lengths to maximize travel and ride quality. Remote reservoirs increase oil capacity and heat dissipation for consistent damping under heavy use, and a unique internal Bump Zone provides additional damping for hard bottom-outs.

• Vehicle fit: Designed for 2022–2026 Toyota Tundra.
• Front suspension: VS 2.5 Series remote-reservoir coilovers with CDEV for adjustable compression damping and improved cooling.
• Rear suspension: 2.5 Aluminum Series remote-reservoir shocks with CDEV for balanced front-to-rear control.
• Adjustable front ride height: Up to approximately 1.25"–3.5" over stock when used with included billet UCAs (varies by sub-model and configuration).
• Increased travel: Up to 40% more front wheel travel compared to stock, depending on vehicle configuration.
• Billet aluminum UCAs: Improved strength, durability, corrected front-end geometry, and on-vehicle camber/caster adjustment.
• Delta Joint PRO: Patented, serviceable joint providing full bump and droop articulation and reduced binding.
• Heat management: Remote reservoirs increase oil volume and cooling to resist damper fade.
• Rebuildable: All ICON shock absorbers in the system are fully rebuildable and re-tunable.
• Wheel & tire fitment: Supports up to 35" tires (35x12.50) with minor fender trimming on most configurations; recommended aftermarket wheel offset ~25 mm.

Notes

• Lift heights indicated are for a stock-equipped vehicle; increasing vehicle weight with accessories will alter lift range.
• Shocks are fully serviceable, rebuildable, and re-tunable.
• Not compatible with vehicles equipped with load-leveling rear height control air suspension.
• Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles.
• Requires recalibration of Advanced Driver Assistance Systems (ADAS) after installation.
• An iOS device is required to run the ICON Intelligent Control (IIC) app.
• Front lift ranges vary by sub-model: typical ranges include approximately 1.25"–3.5" for many gasoline models, ~0.75"–3.0" for some hybrid models, and ~0"–1.5" for TRD Pro models; TRD Sport configurations may exhibit different ranges.
• Included rear shocks are compatible with modest rear lift amounts on vehicles with rear coil springs; exact rear lift compatibility depends on vehicle trim and suspension package.
• Some sub-models and suspension packages may require additional parts or modifications for proper fitment and NVH/drivetrain clearance.
• Minor fender trimming and other vehicle-specific modifications may be required to fit larger tire sizes.

Icon Vehicle Dynamics K53202 Stage 12 Suspension Lift Kit Lift 1.25-3.5" Toyota Tundra 22-26 - Features