Icon Vehicle Dynamics K53201T Stage 11 Suspension Lift Kit Lift 2-3.5" Toyota Tundra 22-26

ICON Stage 11 Complete Suspension System — 2022-2026 Toyota Tundra

The ICON Stage 11 complete suspension system for the 2022-2026 Toyota Tundra enhances on- and off-road performance by combining adjustable 2.5" remote-reservoir coilovers with triple-rate rear coil springs and an adjustable rear track bar. This kit increases front lift range for proper stance and fitment of up to 35" tires, improves alignment specs and front-end geometry, and provides superior damping control with externally adjustable CDC valves.

The system includes 2.5 Series CDCV remote reservoir front coilovers, tubular front upper control arms, billet aluminum rear links, a billet rear adjustable track bar, front sway bar drop brackets, and 2.5 Aluminum Series CDCV rear remote reservoir shocks. Remote reservoirs increase oil volume and heat dissipation to resist overheating and damper fade. ICON CDC valves offer 10 levels of compression damping adjustment for on-demand tuning.

• Vehicle-specific design for 2022-2026 Toyota Tundra
• 2.5 Series front coilovers with remote reservoirs and CDC Valves — improved cooling, increased piston area and valving for greater travel and ride quality
• Adjustable front ride height: up to 2–3.5" over stock when used with included tubular upper control arms (varies by model and equipment)
• Triple-rate rear coil springs — softer droop and ride rates with a firmer overload rate for on-road comfort and off-road bottoming resistance
• Tubular front upper control arms — corrected geometry, added caster, improved component clearance
• Delta Joint PRO — serviceable, rebuildable joint allowing full bump and droop travel while eliminating bind
• Billet rear adjustable track bar — double adjuster rod end threads for on-vehicle fine adjustment to center the axle
• Tubular rear upper and lower links — DOM tubing with PTFE-lined rod ends and multi-durometer bushings for articulation and reduced deflection
• 2.5 Aluminum Series rear remote reservoir shocks — matched tune to the front coilovers with CDC Valves and internal Bump Zone for added bottom-out control
• All ICON shocks are fully rebuildable and re-tunable
• Allows up to a 40% increase in front wheel travel over stock

Performance details: The 2.5 remote reservoir front coilovers provide increased travel and improved damping over stock components. CDC Valves allow external compression adjustment across 10 settings. Remote reservoirs increase shock oil volume and heat dissipation to maintain consistent damping under heavy use. The rear 2.5 Aluminum Series remote shocks include an internal Bump Zone that increases damping for hard bottom-outs and are valved to complement the front coilovers for balanced vehicle control.

Fitment and installation: The triple-rate rear springs are designed to net 0.5" of rear lift on non-TRD Tundra models and 0" rear lift on Tundra models equipped with a TRD suspension package or TRD Pro. Front lift ranges vary by sub-model and equipment. Sway bar drop brackets reduce link bind and allow full suspension travel without overstressing OEM components.

Durability and serviceability: Tubular steel rear links use DOM tubing with a multi-stage powder coat finish for corrosion resistance. Rod ends are PTFE-lined for increased articulation and reduced maintenance. All shocks and many suspension components are serviceable, rebuildable, and re-tunable.

Notes:

• OEM wheels and tires fitment: Yes.
• Recommended aftermarket wheels: 17x8.5" with 5.75" backspace (25 mm offset recommended).
• Recommended tires: 35 x 12.50" (minor fender trimming and modifications may be required).
• Shocks are fully serviceable; lift heights indicated are for a stock-equipped vehicle.
• Advertised lift height ranges are for a stock-equipped vehicle; increasing vehicle weight due to accessories will alter lift range.
• Front lift height varies by sub-model and equipment (examples: TRD Pro front range is lower; most i-Force gasoline models see higher lift ranges; i-Force MAX hybrid models have slightly different ranges).
• Included rear springs net 0.5" of rear lift on non-TRD models; TRD-equipped and TRD Pro models remain at stock rear height (0" net lift).
• Some vehicle configurations require additional parts depending on equipment (examples include part numbers 55153, 55156, and 55164).
• Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles.
• Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install.

Icon Vehicle Dynamics K53201T Stage 11 Suspension Lift Kit Lift 2-3.5" Toyota Tundra 22-26 - Features