Icon Vehicle Dynamics K53197 Stage 7 Suspension Lift Kit Lift 1.25-3.5" Toyota Tundra 22-26

ICON Vehicle Dynamics Stage 7 Complete Suspension System — 2022-2025 Toyota Tundra

The ICON Vehicle Dynamics Stage 7 suspension system for the 2022-2025 Toyota Tundra upgrades the rear shocks to 2.5 Aluminum Series remote reservoirs for improved on- and off-road performance, increased heat dissipation, and enhanced rear damping. The system includes 2.5 Series remote reservoir front coilovers, billet aluminum front upper control arms, and a front sway bar drop kit to deliver improved alignment specs, increased front lift range, and proper stance and fitment for aggressive wheel and tire combinations up to 35x12.50.

The adjustable 2.5 Series remote reservoir front coilovers paired with ICON billet aluminum upper control arms provide increased shock oil volume, superior cooling, and larger 2.5" shock bodies for greater piston area and travel (up to 40% increase over stock). Remote reservoirs reduce damper fade under hard use. The rear 2.5 Aluminum Series remote reservoir shocks include an internal Bump Zone that adds additional damping for hard bottom outs, providing balanced vehicle control from front to rear.

The ICON billet aluminum upper control arms correct front-end geometry, increase on-vehicle camber and caster adjustment, and improve suspension component clearance. OE ball joints are replaced with the serviceable, rebuildable ICON Delta Joint PRO for full bump and droop travel and reduced bind. Included sway bar drop brackets minimize sway bar link bind to allow full wheel travel without overstressing OE components.

• Vehicle specific design: Engineered for 2022–2025 Toyota Tundra
• 2.5 Series front coilovers with remote reservoirs: Superior damping, increased oil volume, and improved shock cooling
• Adjustable front ride height: When used with included billet aluminum UCAs, front lift adjustability varies by sub-model (see technical notes)
• Billet aluminum upper control arms: Added strength, durability, and on-vehicle caster/camber adjustment
• Delta Joint PRO: Serviceable, rebuildable joint with 90 degrees total articulation
• Sway bar drop brackets: Reduce bind in OE sway bar links for improved wheel travel
• Increased wheel travel: Allows up to a 40% increase in front wheel travel over stock without overstressing OE components
• 2.5 Aluminum Series rear remote reservoir shocks: Increased performance, better heat dissipation, and balanced tune with front coilovers
• Rebuildable and re-tunable: All ICON shock absorbers are fully serviceable

Technical Notes:

• OEM wheels & tires fitment: Yes
• Recommended aftermarket wheels: ICON Alloys — 17x8.5" with 5.75" backspace (25 mm offset)
• Recommended tires: 35x12.50" (minor fender trimming and/or modifications may be required)
• Shocks are fully serviceable; advertised lift height ranges apply to stock-equipped vehicles and will be affected by added vehicle weight or accessories
• Not compatible with Load-Leveling Rear Height Control air suspension
• Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles
• Requires recalibration of Advanced Driver Assistance Systems (ADAS) after installation
• If equipped with TRD aluminum skid plate, part number 55164 is required
• For certain 4WD models without the TRD Off-Road package, ICON recommends using the ICON diff drop (Part# 55156) or TRD axles (Part# 434200C020 driver / 434100C020 passenger) to prevent front axle damage; not required for TRD Pro
• Front ride height adjustability (when used with included billet aluminum UCAs) varies by sub-model:
  • Most i-Force gasoline models: approximately 1.25"–3.5"
  • Most i-Force MAX hybrid models: approximately 0.75"–3.0"
  • TRD Pro: approximately 0"–1.75"
  • SR5 equipped with TRD Sport package: approximately 2.25"–4.5"
  • TRD Off-Road / TRD Rally packages: approximately 1.25"–3.5" (varies by configuration)
• Rear shock compatibility:
  • Compatible with 0"–1.5" of rear lift on models equipped with rear coil springs without TRD suspension package
  • Compatible with 0"–1.0" of rear lift on models equipped with rear coil springs with TRD suspension package and TRD Pro

Icon Vehicle Dynamics K53197 Stage 7 Suspension Lift Kit Lift 1.25-3.5" Toyota Tundra 22-26 - Features