Icon Vehicle Dynamics K22101 Stage 1 Suspension Lift Kit Lift 2" Jeep Gladiator JT 20-26

ICON Jeep Gladiator JT Stage 1 Suspension System — 2" Lift

Designed to significantly improve both on- and off-road ride quality for the 2020–2023 Jeep Gladiator JT, this Stage 1 system includes dual-rate front coil springs, billet aluminum rear coil spacers, 2.0 Aluminum Series shocks, front bump stops, adjustable sway bar end links, and all necessary hardware for a complete bolt-on installation. Developed and validated through extensive ICON testing, the system increases wheel travel and refines suspension geometry for enhanced capability across a wide range of terrain.

• Lift height: 2.0" front
• Rear lift: 1.38"
• Tire fitment: Supports up to 35" x 12.50" tires (37" possible with optional bump stop spacer kit)
• Wheel travel gains: Approx. 33% front, 23% rear increase
• Springs: Dual-rate coil springs with lifetime guarantee against sagging or breakage
• Rear spacers: Billet aluminum 1.375" coil spacers to eliminate factory rake
• Shocks: 2.0 Aluminum Series shocks with vehicle-specific valving; fully serviceable
• Sway bar links: Adjustable billet aluminum front sway bar links
• Fitment: 100% bolt-on system for straightforward installation
• Proven: Validated through ICON’s accelerated off-road testing program for tune, strength, and durability

Notes

• OEM wheels and tires remain compatible.
• Recommended aftermarket wheel sizes include 17x8.5", 18x9", and 20x9"; recommended wheel offsets generally range around -6mm to -12mm depending on wheel selection.
• For 37" tires, an optional bump stop spacer kit is required.
• An adjustable track bar may be needed to realign the axle side-to-side or to add additional strength; use a compatible adjustable track bar if required.
• Will not fit Gladiator Mojave trim.
• Shocks in this system are fully serviceable.
• Diesel models will typically see approximately 1.75" of front lift over stock due to heavier vehicle weight.
• ICON’s advertised lift heights are based on a typical Jeep JT build that often includes added accessory weight (for example, heavier bumpers or winches); lift heights may be greater on stock-weight vehicles.

Icon Vehicle Dynamics K22101 Stage 1 Suspension Lift Kit Lift 2" Jeep Gladiator JT 20-26 - Features