Fabtech K4185 Suspension Lift Kit Lift 2" Jeep Gladiator JT 20-26

2020-26 Jeep Gladiator Mojave 4WD

This lift kit enhances suspension performance for off-highway use, including rock crawling, aggressive trail riding, and overland expeditions. It is tuned with corner-specific dual rate coil springs to work with the factory 2.5 internal bypass shocks for improved ride quality and increased suspension travel.

The system is a complete short arm suspension that uses the factory lower control arm mounts for straightforward installation. Heavy wall steel lower link arms resist bending and include large polyurethane bushings on one end and internal threads on the other to accept durable rod-end joints for long life and quiet operation. Shock extension brackets and relocated bump stop pads accommodate the increased ride height while maintaining proper suspension travel.

To correct steering geometry at the increased ride height, the kit includes a draglink flip kit and a heavy duty track bar bracket to position steering components in the proper operating plane, allowing full articulation without binding. The rear receives a heavy duty track bar bracket to center the axle and help retain the factory roll center. Extended sway bar links reposition the sway bars to prevent bind at full extension.

This short arm suspension is an excellent option for Gladiator Mojave owners who want to retain the factory internal bypass shocks while running larger tires and maximizing offroad capability.

• Front 1.75" OD, .250" wall link arms
• Rear 2.0" OD, .313" wall link arms
• Front & Rear dual rate long travel coil springs
• Shock extension mounts for factory 2.5 internal bypass shocks
• Hydraulic bump stop extension mounts and relocated bump stop pads
• Draglink flip kit
• Front & rear track bar brackets
• Front & rear sway bar links with urethane bushings

• Control Link Arms: Proper bushing cross bolt angles reduce premature bushing wear and improve handling. The lower link arms replace vulnerable factory arms and use heavy-duty rod-end joints backed by a lifetime warranty.
• Dual Rate Coil Springs: Corner-specific long travel coils keep the vehicle level side-to-side. The first stage provides a compliant ride over small bumps, and the second stage supports payload and absorbs larger impacts at higher speeds.
• Shock Mounts: Heavy duty brackets reposition the lower shock mounts so the factory 2.5 internal bypass shocks provide correct damping through the increased travel range.
• Bump Stop Mounts: Front and rear bump stop extensions work with the factory hydraulic bump stops to prevent over-cycling of the suspension at the new ride height.
• Draglink Flip System: Relocates the draglink to retain factory steering geometry with the stock pitman arm, providing bind-free articulation and reducing bump steer without increasing steering box load.
• Front Track Bar Bracket: A robust steel bracket relocates the front track bar to the proper plane and bolts to the axle housing for durable performance.
• Rear Track Bar Bracket: A bolt-on steel bracket minimizes mount deflection and retains the factory roll center with the raised ride height.
• Sway Bar Links: Extended length links with urethane bushings reposition the sway bars to prevent them from going over center and creating link bind at full extension.

*Installation and compatibility notes: Fits 2020–2026 Jeep Gladiator Mojave 4WD models only. The kit is designed to retain the factory 2.5 internal bypass shocks and includes the required shock extension mounts and bump stop relocations. Heavy offroad use may require upgraded front and rear driveshafts. Professional installation is recommended to ensure proper alignment and steering geometry.

Fabtech K4185 Suspension Lift Kit Lift 2" Jeep Gladiator JT 20-26 - Features