$0
Performance suspension system designed to maintain proper front suspension geometry while increasing travel. The kit uses extended-length 1.75" OD heavy-wall upper and lower control arm links with urethane bushings, and includes replacement front coil springs tuned for a quality highway ride with good off-road capability. The system also includes track bar brackets, a pitman arm, end links, bump stops, and a transmission mount. Rear lift is provided by a block and U-bolt kit.
* Installation/compatibility notes: Non-dually models only. Does not fit standard cab models. Fits automatic transmission only. Will not fit 2013 3500 trucks with radius arm suspension.
| Transmission | Automatic |
| Note | Does not fit standard cab models |
| Note | Will not fit 2013 3500 trucks w/radius arm suspension |
| Note | Fits automatic transmission only |
| Lift Height, inch | 6" |
| Drive Type | 4WD |
| Brand | Fabtech |
| Note | Non dually models only |
| Box Weight | 190 lbs |
| Box Length | 26 in |
| Box Width | 15 in |
| Box Height | 7 in |
|
Fitment
Show all |
2009||Dodge||Ram 2500, 2010||Dodge||Ram 2500, 2011||Dodge||Ram 2500, 2012||Dodge||Ram 2500, 2013||Dodge||Ram 2500, 2009||Dodge||Ram 3500, 2010||Dodge||Ram 3500, 2011||Dodge||Ram 3500, 2012||Dodge||Ram 3500, 2013||Dodge||Ram 3500, 2013||Ram||2500, 2013||Ram||3500, 2012||Ram||2500, 2012||Ram||3500, 2011||Ram||2500, 2011||Ram||3500, 2009||Ram||2500, 2009||Ram||3500, 2010||Ram||2500, 2010||Ram||3500
|
| Submodel | Single Rear Wheel |
